Blog

House Cleaning West Seattle - Clean Your Water Cooler

If have got a water cooler in your house then you need to clean it on a regular basis. You should clean the water cooler after every six weeks or if when you change your water bottle during the house cleaning. To stay healthy you need to clean your water cooler. Though, to clean the water dispenser you need to give your precious time, water and vinegar. 

 

Here are the steps by house cleaning West Seattle which you need to follow for house cleaning water cooler/Dispenser. 

 

1. Unplug the water dispenser from the walls and remove the bottle from the water dispenser

For house cleaning, the first thing you need to do is make sure there are no other appliances plugged in to the same power outlet which you have been using for the water cooler or near the area where you are going to clean the water cooler. Like this you can avoid the possibility of water to meet with the electricity. 

 

2. Wet the sponge to clean the inner surface of the water cooler

In the second step of house cleaning you need to clean the inner surface of your water cooler and let it sit for 5 minutes  but not more than that in order to avoid the wear and tear. After that you need to drain the solution by using the tap of your water cooler or you can just drain this container down a sink or toilet.

 

3. Rinse the remaining solution that is left behind

For house cleaning you need to fill the inner tank with water 4 times and pour it out by using the tap which we normally use to pour out the water for drinking purpose in the plastic bucket. Rinse it again and again just to make sure that there is no bleach or vinegar solution left in the water cooler. 

 

4. Remove the drip tray and rinse it well with water 

In fourth step of house cleaning you need to wash both the tray and the screen (if you have one) and clean both of them by using the clean tap water before you attach them back in your water dispenser. Also, make sure that you full dry them and not leave any moisture in any tight areas. 

 

5. Wash your hands well and dry the new bottle by using a microfiber cloth

When house cleaning make sure that you wash your hands with soap or hand sanitizer before manipulating the water bottle again. 

 

6. Check out if that works

During the house cleaning process you need to take an empty glass and fill water in it from both of the faucets of your water dispenser and then taste the water just to make sure that there is not any unpleasant taste that has been left behind. 

 

If you need more help regarding the cleaning of water dispensers then you can contact your local house cleaning West Seattle experts.